Cigar Bloom vs. Mold: What’s the dif’?

One of the more unnerving experiences for cigar smokers, especially those who are new to the wonderful world of premium handmade cigars, is when they discover that the wrappers on some of their prized primos have developed a white, fuzzy substance. The knee-jerk reaction to this is usually something like, “Houston, we’ve got a problem.”

Well, you may have a problem and you may not. It all depends on what that substance on your cigars really is. It may be one of two things: “the good,” something called “Bloom,” also referred to as “Plume,” or, “the bad and the ugly,” good old-fashioned mold.

Bloom is what happens when the oils in the tobaccos disperse throughout the cigar and eventually reach the wrapper. These “essential oils” congregate on the surface of a cigar and appear as very tiny white crystals. In fact, you can sometimes shine a light on the cigars and the crystals will shimmer a bit as they reflect the light. The result of these dried crystals is the appearance of a powdery white substance on the wrapper (see photo 1).

So, what should you do if your cigars have bloom? Nada. Bloom is harmless and is a common feature on cigars that have aged for long periods of time, especially cigars with oily wrappers. It’s a sign that your cigars are aging nicely and still healthy. But don’t take it for granted. Keep an eye on it, especially if you’ve never encountered it before, because it may turn out to be something else. Assuming it is bloom (or plume),
very lightly brush-off the bloom with your finger. It will not affect the flavor or bouquet of your cigars.

Mold on foot of cigarNow let’s get to the bad and the ugly – mold. Mold is a fungus that appears on your cigars when they are over humidified. It can be found in various colors, including white, gray, blue-gray, or blue-green. The best way to describe mold, as opposed to the powdery nature of bloom, is that mold appears as fuzzy patches on your cigars. These patches are 3-dimensional and look like miniature cotton balls. Mold occurs most often on the wrapper, but can also occur on the foot and/or within the filler of a cigar (see photo 2).

If your cigars have mold the first thing you want to do is to get the affected sticks away from your other cigars. This leads to the oft-asked question, “Should you toss a stick that has mold on it?” To be absolutely safe, yes. Many cigar smokers wipe the mold off their cigars and smoke them anyway. You can try it, but it could be risky, because mold comes in different varieties, some of which can cause illness if they are allowed to culture in the wrong place, like in your mouth or in your lungs. Note however, that there are millions of varieties of mold, and not every type will cause illness, but some kinds of mold are able to serve as pathogens in the body and can cause respiratory or other medical conditions.

Mold spreads by producing spores. These spores then spread the fungus to you or to the rest of your cigars. So, if you’re feeling lucky, brush off the mold and smoke them; otherwise, you’re better off trashing them.

When checking your cigars, be sure you always check for signs of mold, especially if your humidity has been on the high side, say 75% and above. If you find some cigars with mold and decide to salvage them, the very least you should do is get them away from your other cigars, wipe off the mold, and move them to a different humidor (preferably empty) or another container. If you take that route, do not humidify the cigars for at least 12 hours. They are probably already too moist, and the idea here is to let them dry out for a while.

Finally, the best medicine for warding off mold spores is to keep the humidity level in your humidors from getting too high in the first place.

Thanks to David “Doc” Diaz at www.StogieFresh.com for providing most of the source material for this article.

 

Famous Smoke Shop

Author:

The world's fastest, friendliest, and best place to buy cigars! Since 1939, Famous Smoke Shop has prided itself on offering the freshest, largest selection cigars at the most competitive prices, and customer service that can't be beat.

Comments

  1. will hutt says:

    I AM A NEW CIGAR USER AND AM NOT SURE WHAT TO BUT OR HOW TO BUY CIGARS, I HAVE TRIED THE DON TOMAS(WHICH I ENJOY) AND THE H. UPMANN CAMEROON, WHICH I ALSO ENJOYED BUT THOUGHT TO BE A LITTLE STRONGER ON THE PALATE. I ALSO EXPERIENCED MY FIRST REACTION TO THE BLOOM AND PROCEEDED TO THE SHOP WHERE I BOUGHT IT. NEEDLESS TO SAY, I LEARNED SOMETHING. P.S. I AM NOT A WEALTHY MAN, WHAT DO YOU SUGGEST I LOOK FOR IN A CIGAR WITHOUT FEELING CHEAP WHILE I AM SHOPPING.

  2. Sarah says:

    One effective way to combat mold problems is by the use of desiccants like Silica Gel. These are the same small sachets you find in packaging of various products like electronics, garments, etc.

    Silica Gel works by absorbing the moisture in its surrounding area. For most mold challenges, it does the job pretty well. Small sachets cost less than a dollar. It truly is a cost effective way of protection from moisture.

  3. If it’s a cost issue and you prefer mild cigars, try the Famous Value Line Dominican #300.
    (http://www.famous-smoke.com/brand/value+line+dominican+no.+300+cigars)

    Another good suggestion would be the Famous Dominican 2000 might serve you well, too.
    (http://www.famous-smoke.com/brand/famous+dominican+selection+2000+cigars)

    The quality of both is very good.

    Good luck and enjoy,
    G~

  4. jonesy says:

    I would also recommend the Flor de Oliva [gold] or the Juan Y Ramone bundles

  5. Lester says:

    I really enjoy the julietta’s. Romeo and Juliet reasonably priced and good flavor

  6. ezekiller2 says:

    Does mold grow on the humidifiers? I checked mine today and it had fuzzy white stuff on top.

  7. Gary Korb says:

    Yes, it does grow in humidifiers. That white stuff is a form of mold. If you are using a green oasis foam humidifier and it’s several years old, it’s probably time to replace it anyway. I had a similar problem. Replace your current model with a crystal-based humidifier (Xikar, Cigar Savor, et. al.) and only use Monster Venom Solution or a similar 50/50 solution.

  8. ezekiller2 says:

    Yea I removed them immediately. Also I’ve heard mixed opinions about removing cigars from their wrappers when putting them in the humi. What do you suggest?

  9. Gary Korb says:

    I tend to remove the cellos from almost all of my cigars. The only cigars I keep in cello are those with very delicate wrappers. Sometimes I cut the cello at the foot to allow more air to flow into the cigar. They may age a little quicker w/o cello, but it won’t inhibit their ability to age well over time that much, if at all.

  10. Ronny says:

    I am using a Xikar crystal humidifier (about 2 months old) with Monster venom solution. I found today it has white mold in it. Do I throw it or can it be cleaned?

  11. Hi Ronny,
    If it’s just white mold, it can be cleaned. Try soaking rinsing it using a solution of rubbing alcohol and distilled water. Then rinse it with distilled water. Should be good as new.

    Mold spores are all around us in the environment, and cannot be eradicated. Our task is to keep prevent them from growing by maintaining ideal humidor conditions – no higher than 70 degrees F and 70% relative humidity.

  12. Narsej says:

    Well I found out having mold problems with excess of humidity. I explained disinfection process here:

    http://ourhouzz.blogspot.com/2013/06/remove-mold-in-humidor-with-disinfection.html